ABB DRY TYPE TRANSFORMER UP TO 66 Kv
Standard dry-type transformers
EcoDry: ultra-efficient transformers
TriDry: triangular transformers (reduced noise and losses)
HiDry72: dry-type power transformers for subtransmission (up to 63 MVA and 72.5 kV)
hi-T Plus: increased overload capability and lifetime
Submersible transformers for network applications
Reactors, inductors, chokes: for Alternating Current (AC) and Direct Current (DC) applications
Low Voltage (LV) transformers
Water-cooled transformers and reactors
Customized dry-type transformers and reactors for special
applications: converters, marine, wind turbines, railways
and rolling stock
12KV AIR-INSULATED SWITCHGEAR (AIS)WITH
Rated service voltage: 12kV
Rated frequency: 50/60 Hz
Rated power frequency withstand voltage: 28/38kV
Rated impulse withstand voltage: 75kV & 95kVp
Rated current of VCB: 630~3150A
Maximum rating of busbars: 3150A
Short time withstand current: up to 50kA 3 seconds
Fully rated / fault-make integral earthing switch
VACUUM CIRCUIT BREAKER (VCB)
Runtime and average values for voltage (L-N, L-L), current and neutral current, COS Ö and PF.
Runtime and total values for P, Q, S.
Voltage and current harmonics measurements up to the 31st harmonic.
Total harmonic distortion of voltage and current.
Index, current and previous hour, day & month values for active energy.
Inductive reactive energy and capacitive reactive energy.
<% 0,1 transmission error.
Adjustable demand times between 1-60 min.
2 pulse outputs.
85-265 VAC input for second tariff.
Configurable 2 alarm outputs.
User friendly menu.
Recording data values and alarm messages.
Indice synchronization with electric meters.
Easy configuration and data monitoring through 160x240 LCD Monitor and 6 buttons on the front panel.
On-board Lithium battery supports real time clock and non-volatile memories.
Calculated and archived data is stored for 1 Year in non-volatile memory and flash memory.
AIR CIRCUIT BREAKER
Category: External type (drawout type)
Rated current: 3200A
Number of poles: 3P
Short circuit current: 85kA
Standard IEC 60947-2, EN60947-2, BS, VDE, JIS C 8201-2-1